OCH2991F
Single Phase DC Fan Driver
- Motor typeSingle Coil
- Operating voltage3V~18V
- Max Lock CurrentBuilt-in Current Limiting
- Fan Safety Rated Current5V/9V/12V-1.4A
- PackageTSSOP-16L-EP
- Operating Temperature-40℃~105℃
-
Overview
-
Features
-
Specifications
-
Package & Ordering
-
Apply
overview
OCH2991F is a fan motor driver for the single coil brushless DC motor. With its high efficient direct PWM control mode, OCH2991F controls the speed of brushless DC motor with an external hall switch IC. OCH2991F is suitable to drive variable speed motors for personal computer’s power supply radiation fans and CPU coolers.
OCH2991F integrates PWM fan speed control, minimum speed mode, soft start, soft switch, fan tachometer, lock protection, auto restart and Hall IC power circuit. PWM mode controls fan speed in low noise and low vibration ways by adjusting PWM signal duty. OCH2991F can set minimum fan speed by presetting MINSP voltage. With soft start function, OCH2991F can effectively reduce the peak current when power on. To reduce fan driver audible noise and power loss, the OCH2991F features a soft on/off phase transition and automatic phase-lock function of the motor winding BEMF and current.
Robust protections in OCH2991F include under-voltage lockout (UVLO), rotor deadlock protection, over current protection (OCP) and thermal shutdown.
The OCH2991F requires a minimal number of external components to save solution cost. The OCH2991F is available in TSSOP16L-EP、SOP-8L-EP packages.
Applications
Power、Industrial product、Equipment or ServersSingle Coil DC Brushless DC Motor
Typical Application Circuit

features
-
Supporting speed: Max. 15000 Rpm/Min.
-
Wide Operating Input Voltage Range: 3.0V~18V
-
Integrated Power MOSFETs: Total 230mΩ (High side + Low side)
-
PWM Fan Speed Control
-
Programmable Minimum Fan Speed
-
MINSP Setting Minimum Fan Speed
-
Soft On/Off Phase Transition
-
Soft Start and Soft Restart Function
-
FG Output
-
Over Temperature Protection
-
External Hall Switch
-
Lock-shutdown protection & auto-restart function
-
Automatic Phase Lock Detection of Winding BEMF and Current Zero-Crossing
-
10KHZ to 60kHz PWM Input Frequency Range
-
Fixed 26kHz Output Switching Frequency
-
OCP (Over Current Protection)
-
Current Limit & Soft Start and Soft Restart
-
Thermal Protection and Automatic Recovery
-
Built-In Input UVLO
-
-40°C to + 105°C Temperature Range
-
RoHS Compliant
-
TSSOP-16L-EP、SOP-8L-EP packages
Specifications
-
Motor typeSingle Coil
-
Operating voltage3V~18V
-
Max Lock CurrentBuilt-in Current Limiting
-
Fan Safety Rated Current5V/9V/12V-1.4A
-
PackageTSSOP-16L-EP
-
Operating Temperature-40℃~105℃
-
Sensitivity (Gauss)External Hall±10
-
PWM Speed Control√
-
Min Speed Setting√
-
Lock Auto-Restart√
-
SilentBest
-
Short Circuit Protection√
Package & Ordering
Ordering Information
| Part Number | Package Type | Packing Qty. | Temperature | Eco Plan | Lead |
|---|---|---|---|---|---|
| OCH2991FEFAD | TSSOP-16L-EP | 2500pcs/Reel | -40~ +105°C | RoHS | Cu |
| OCH2991FESAD | SOP-8L-EP | 4000pcs/Reel | -40~ +105°C | RoHS | Cu |
Package & Pin Definition

| Pin Name | TSSOP16L-EP | SOP-8L-EP | Pin Function |
|---|---|---|---|
| NC | 1,2,3,10,14 | / | No Connection |
| OUT1 | 4 | 1 | Output 1 |
| VDD | 5 | 2 | Positive Power Supply |
| PWM | 6 | 3 | PWM Signal Input |
| FR | 7 | / | Inductive polarity Or Rotation Direction Control Pin |
| MINSP | 8 | 4 | Input to set minimum speed or fan off range |
| VOUT | 9 | 5 | Regulator Output (Power supply for external HALL switch) |
| HW/SCL | 11 | 6 | Hall switch input (connect the external Hall Switch output) |
| FG | 12 | 7 | Rotation Speed Detection. This is an open-drain output. |
| OUT2 | 13 | 8 | Output 2 |
| GND | 15,16,Exposed pad | Exposed pad | Ground |