我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OCH2992

Single Phase Smart DC Fan Driver

  • Motor typeSingle Coil
  • Operating voltage3V~16V
  • Max Lock CurrentBuilt-in Current Limiting
  • Fan Safety Rated Current5V/9V/12V-1A
  • PackageESOP-8L
  • Operating Temperature-40℃~105℃
TSSOP-16L-EP.png
  • Overview
  • Features
  • Specifications
  • Package & Ordering
  • Apply

overview

OCH2992 is a fan motor driver for the single coil brushless DC motor. With its high efficient direct PWM control mode, OCH2992 controls the speed of brushless DC motor with an external hall switch IC. OCH2992 is suitable to drive variable speed motors for personal computer’s power supply radiation fans and CPU coolers.

OCH2992 integrates PWM fan speed control, minimum speed mode, soft start, soft switch, fan tachometer, lock protection, auto restart and Hall IC power circuit. PWM mode controls fan speed in low noise and low vibration ways by adjusting PWM signal duty.

OCH2992 can set minimum fan speed by presetting MINSP voltage. With soft start function, OCH2992 can effectively reduce the peak current when power on. To reduce fan driver audible noise and power loss, the OCH2992 features a soft on/off phase transition and automatic phase-lock function of the motor winding BEMF and current.

Robust protections in OCH2992 include under-voltage lockout (UVLO), rotor deadlock protection, over current protection (OCP) and thermal shutdown.

The OCH2992 requires a minimal number of external components to save solution cost. The OCH2992 is available in SOP-8L-EP packages.

Applications

Single Coil Brushless DC MotorSingle Coil Brushless DC Fan

Typical Application Circuit

OCH2992 Typical Application Circuit

features

  • Supporting speed: Max. 15000 Rpm/Min.
  • Wide Operating Input Voltage Range: 3.0V~16V
  • Integrated Power MOSFETs: Total 350mΩ (High side + Low side)
  • PWM Fan Speed Control
  • Programmable Minimum Fan Speed
  • MINSP Setting Minimum Fan Speed
  • Soft Start And Soft Restart Function
  • FG Output
  • External Hall Switch
  • Lock-shutdown protection & auto-restart function
  • Automatic Phase Lock Detection of Winding BEMF and Current Zero-Crossing
  • 10kHz to 60kHz PWM Input Frequency Range
  • Fixed 26kHz Output Switching Frequency
  • OCP (Over Current Protection)
  • Current Limit
  • Thermal Protection and Automatic Recovery
  • Built-In Input UVLO
  • -40°C to + 105 °C Temperature Range
  • RoHS Compliant
  • SOP-8L-EP packages

Specifications

Type
Parameter
Type
Parameter
  • Motor type
    Single Coil
  • Operating voltage
    3V~16V
  • Max Lock Current
    Built-in Current Limiting
  • Fan Safety Rated Current
    5V/9V/12V-1A
  • Package
    ESOP-8L
  • Operating Temperature
    -40℃~105℃
  • Sensitivity (Gauss)
    External Hall±10
  • PWM Speed Control
    √
  • Min Speed Setting
    √
  • Lock Auto-Restart
    √
  • Silent
    Best
  • Short Circuit Protection
    √

Package & Ordering

Ordering Information

Part NumberPackage TypePacking QuantityTemperatureEco PlanLead
OCH2992ESADSOP-8L-EP4000pcs/Reel-40~ +105°CRoHSCu

Package & Pin Definition

OCH2992 pin configuration
Pin NamePin NumberPin Function
OUT11Output 1
VDD2Positive Power Supply
PWM3PWM Signal Input
MINSP4Input to set minimum speed or fan off range
VOUT5Regulator Output (Power supply for external HALL switch)
HW(FG)/SCL6Rotation Speed Detection (connect the external Hall Switch output)
GND7Ground
OUT28Output 2
GNDExposed padGround

Series of product applications