我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OCH2993 OCH2993R

Single Phase DC Fan Driver

  • Motor typeSingle Coil
  • Operating voltage3.5V~18V
  • Max Lock CurrentBuilt-in Current Limiting
  • Fan Safety Rated Current5V/9V/12V-1.4A
  • PackageTSSOP-16L-EP
  • Operating Temperature-40℃~105℃
TSSOP-16L-EP.png
  • Overview
  • Features
  • Specifications
  • Package & Ordering
  • Apply

overview

OCH2993 is a fan motor driver for the single coil brushless DC motor. With its high efficient direct PWM control mode, OCH2993 controls the speed of brushless DC motor with an external hall switch IC. OCH2993 is suitable to drive variable speed motors for personal computer's power supply radiation fans and CPU coolers.

OCH2993 integrates PWM fan speed control, minimum speed mode, soft start, soft switch, fan tachometer, lock protection, auto restart and Hall IC power circuit. PWM mode controls fan speed in low noise and low vibration ways by adjusting PWM signal duty.

OCH2993 can set minimum fan speed by presetting MINSP voltage. With soft start function, OCH2993 can effectively reduce the peak current when power on. To reduce fan driver audible noise and power loss, the OCH2993 features a soft on/off phase transition and automatic phase-lock function of the motor winding BEMF and current.

Robust protections in OCH2993 include under-voltage lockout (UVLO), rotor deadlock protection, over current protection (OCP) and thermal shutdown.

The OCH2993 requires a minimal number of external components to save solution cost. The OCH2993 is available in TSSOP16L-EP, SOP-8L-EP packages.

Applications

Power, Industrial product, Equipment or ServersSingle Coil DC Brushless DC Motor

Typical Application Circuit

OCH2993 Typical Application Circuit

features

  • Supporting speed: Max. 40000 Rpm/Min.
  • Wide Operating Input Voltage Range: 3.5V~18V
  • Integrated Power MOSFETs: Total 220mΩ (High side + Low side)
  • PWM Fan Speed Control
  • Programmable Minimum Fan Speed
  • MINSP Setting Minimum Fan Speed
  • Soft On/Off Phase Transition
  • Soft Start and Soft Restart Function
  • FG Signal Output
  • Over Temperature Protection
  • External Hall Switch
  • Lock-shutdown protection & auto-restart function
  • Automatic Phase Lock Detection of Winding BEMF and Current Zero-Crossing
  • 15KHz to 60kHz PWM Input Frequency Range
  • Fixed 26kHz Output Switching Frequency
  • OCP (Over Current Protection)
  • Current Limit & Soft Start and Soft Restart
  • Thermal Protection and Automatic Recovery
  • Built-In Input UVLO
  • -40°C to + 105°C Temperature Range
  • RoHS Compliant
  • TSSOP-16L-EP, SOP-8L-EP packages

Specifications

Type
Parameter
Type
Parameter
  • Motor type
    Single Coil
  • Operating voltage
    3.5V~18V
  • Max Lock Current
    Built-in Current Limiting
  • Fan Safety Rated Current
    5V/9V/12V-1.4A
  • Package
    TSSOP-16L-EP
  • Operating Temperature
    -40℃~105℃
  • Sensitivity (Gauss)
    External Hall±10
  • PWM Speed Control
    √
  • Min Speed Setting
    √
  • Lock Auto-Restart
    √
  • Silent
    Best

Package & Ordering

Ordering Information

Part NumberPackage TypePacking Qty.TemperatureEco PlanLead
OCH2993EFADTSSOP-16L-EP2500pcs/Reel-40~ +105°CRoHSCu
OCH2993FESADSOP-8L-EP4000pcs/Reel-40~ +105°CRoHSCu

Package & Pin Definition

OCH2993 pin configuration
Pin NameTSSOP16L-EPSOP-8L-EPPin Function
NC1,2,3,10,14/No Connection
OUT141Output 1
VDD52Positive Power Supply
PWM63PWM Signal Input
FR7/Inductive polarity Or Rotation Direction Control Pin
MINSP84Input to set minimum speed or fan off range
VOUT95Regulator Output (Power supply for external HALL switch)
HW/SCL116Hall switch input (connect the external Hall Switch output)
FG127Rotation Speed Detection. This is an open-drain output.
OUT2138Output 2
GND15,16,Exposed padExposed padGround

Series of product applications