我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OCB608

Single-Channel Brushed DC Motor Driver

  • Operating voltage VDD2V~9.6V
  • Operating voltage VCC2V~6V
  • Motor count1 
  • Peak current3.5A
  • Rds(on)0.297Ω
  • Operating Temperature-40℃~85℃
SOP-8L-EP.png
  • Overview
  • Features
  • Specifications
  • Package & Ordering

overview

The OCB608 is a brushed DC motor driver solution developed for battery-powered toys and motion control applications.

The OCB608 integrates an H-bridge driver circuit designed with N-channel and P-channel power MOSFETs, suitable for driving brushed DC motors or stepper motors. The OCB608 has a wide operating voltage range of 2V to 9.6V, a maximum continuous output current of 2A and a maximum peak output current of 3.5A.

The OCB608 has a built-in over-temperature protection circuit. When the load current through the driver circuit is far greater than the maximum continuous current, the junction temperature of the internal chip rises rapidly due to the limited heat dissipation capability of the package. Once it exceeds the set value (typically 165°C), the internal circuit immediately turns off the output power transistors and cuts off the load current, preventing continued temperature rise from causing safety hazards such as smoke or fire in the plastic package. The built-in thermal hysteresis circuit ensures that the circuit can only be controlled again after it returns to a safe temperature.

The OCB608 is available in an SOP-8L package with an operating temperature range of -40°C to 85°C.

Applications

Toy motor drivers

Typical Application Circuit

OCB608 Typical Application Circuit

features

  • Wide operating voltage range (2V~9.6V)
  • Low standby current (less than 1μA)
  • Low on-resistance (0.297Ω)
  • Maximum continuous output current up to 2A, peak 3.5A
  • Built-in power MOS full-bridge driver
  • Forward, reverse, stop and brake functions
  • Built-in over-temperature protection with hysteresis
  • Built-in 15K pull-down resistor to ground, low input current
  • No external filter capacitor required
  • No external freewheeling diode required
  • Available in SOP-8L package
  • ESD rating: 6KV

Specifications

Type
Parameter
Type
Parameter
  • Operating voltage VDD
    2V~9.6V
  • Operating voltage VCC
    2V~6V
  • Motor count
    1 
  • Peak current
    3.5A
  • Rds(on)
    0.297Ω
  • Operating Temperature
    -40℃~85℃
  • PWM Speed Control
    √
  • OTP
    √
  • Package
    SOP-8L

Package & Ordering

Ordering Information

Part NumberPackagePacking QuantityOperating TemperatureEnvironmental RequirementFrame
OCB608SADSOP-8L4000 pcs/reel-40°C ~ 85 °CROHSCopper

Package & Pin Definition

OCB608 pin configuration
Pin NamePin No.I/ODescription
VCC1ILogic power supply input
INA2IMotor logic control input A
INB3IMotor logic control input B
VDD4PPower supply positive input
OUTA5OMotor drive output A
GND6GGround (battery negative)
GND7GGround (battery negative)
OUTB8OMotor drive output B