OCB1919
Dual-Channel Brushed DC Motor Driver
- Operating voltage VDD2V~9.6V
- Operating voltage VCC2V~6V
- Motor count2
- Peak current3.5A/channel
- Rds(on)0.29Ω/channel
- Operating Temperature-40℃~85℃
-
Overview
-
Features
-
Specifications
-
Package & Ordering
overview
The OCB1919 is a brushed DC motor driver solution developed specifically for battery-powered toys and motion control applications.
The OCB1919 integrates two channels of H-bridge drive circuits designed with N-channel and P-channel power MOSFETs, suitable for driving brushed DC motors or stepper motors. It has a wide operating voltage range of 2V to 9.6V and integrates two motor drive circuits with identical current capability. With both channels operating simultaneously, each channel can deliver a maximum continuous output current of 1.6A and a maximum peak output current of 3.5A; with a single channel operating, the maximum continuous output current reaches 2A and the maximum peak output current reaches 3.5A.
The OCB1919 has a built-in over-temperature protection circuit. When the load current through the drive circuit is much larger than the maximum continuous current, the junction temperature of the internal chip rises rapidly due to the limited heat dissipation capability of the package. Once it exceeds the set value (typically 165°C), the internal circuit immediately turns off the output power transistors and cuts off the load current, preventing continued temperature rise from causing safety hazards such as smoke or fire in the plastic package. The built-in temperature hysteresis circuit ensures that the circuit is allowed to be controlled again only after it has recovered to a safe temperature.
The OCB1919 is available in an SOP-16L package, with an operating temperature range of -40°C to 85°C.
Applications
Toy motor drive
Typical Application Circuit

features
-
Wide operating voltage range (2V~9.6V)
-
Low standby current (less than 1μA)
-
Low on-resistance (0.29Ω)
-
With both channels operating simultaneously, maximum continuous output current of 1.6A and peak current of 3.5A per channel
-
Single-channel maximum continuous output current up to 2A, peak 3.5A
-
Integrated dual-channel power MOS full-bridge drive
-
Supports forward, reverse, stop and brake functions
-
Built-in over-temperature protection with hysteresis
-
Built-in 15K pull-down resistor to ground, low input current
-
No external filter capacitor required
-
No external freewheeling diode required
-
SOP-16L package
-
ESD rating: 6KV
Specifications
-
Operating voltage VDD2V~9.6V
-
Operating voltage VCC2V~6V
-
Motor count2
-
Peak current3.5A/channel
-
Rds(on)0.29Ω/channel
-
Operating Temperature-40℃~85℃
-
PWM Speed Control√
-
OTP√
-
PackageSOP-16L
Package & Ordering
Ordering Information
| Part Number | Package | Packing Quantity | Operating Temperature | Environmental Requirement | Lead Frame |
|---|---|---|---|---|---|
| OCB1919SAD | SOP-16L | 2500pcs/Reel | -40°C ~ 85°C | ROHS | Copper |
Package & Pin Definition

| Pin Name | Pin No. | I/O | Description |
|---|---|---|---|
| VCC1, VCC2 | 1, 5 | I | Logic power supply input |
| INA1, INB1 | 2, 3 | I | Motor 1 logic control inputs |
| INA2, INB2 | 6, 7 | I | Motor 2 logic control inputs |
| VDD1, VDD2 | 4, 8 | P | Power supply positive input |
| OUTA2, OUTB2 | 9, 12 | O | Motor 2 drive outputs |
| GND | 10, 11, 14, 15 | G | Ground (battery negative) |
| OUTA1, OUTB1 | 13, 16 | O | Motor 1 drive outputs |