我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OCD1216

2~7.5V Dual-Channel Brushed Motor Driver

  • Operating voltage VDD2V~7V
  • Motor count2
  • Peak current3A/channel
  • Rds(on)0.4Ω/channel
  • Operating Temperature-40℃~125℃
  • PWM Speed Control√
TSSOP-16L-EP.png
  • Overview
  • Features
  • Specifications
  • Package & Ordering

overview

The OCD1216 is a brushed DC motor driver solution developed for battery-powered toys and motion control applications.

The OCD1216 integrates dual-channel H-bridge driver circuits built with N-channel power MOSFETs, suitable for driving brushed DC motors or stepper motors. The OCD1216 has a wide operating voltage range of 2V to 7.5V and integrates two motor driver channels with identical current capability. With both channels operating simultaneously, the continuous output current of the two channels supports 1.2A and the peak output current supports 3A; with a single channel operating, the maximum continuous output current supports 1.6A and the maximum peak output current supports 3A.

The OCD1216 has built-in over-temperature protection. When the load current through the chip is far greater than the maximum continuous current of the circuit, the junction temperature rises rapidly because of the limited thermal dissipation of the package. Once it exceeds the set value (typically 170°C), the internal circuit immediately turns off the output power transistors and cuts off the load current, preventing continued temperature rise from causing safety hazards such as smoke or fire in the plastic package. The built-in temperature hysteresis circuit ensures that control of the circuit is allowed again only after it has returned to a safe temperature.

The OCD1216 is available in an SOP-16L package, with an operating temperature range from -40°C to 85°C.

Applications

Toy motor driveSingle-cell lithium battery brushed motor drive2-4 AA/AAA dry cell brushed motor driveLow-voltage H-bridge driver

Typical Application Circuit

OCD1216 Typical Application Circuit

features

  • H-bridge driver with built-in PMOS/NMOS power switches
  • Supports four load motor functions: forward/reverse/stop/brake
  • Very low standby current (typ. 0.1uA)
  • Low on-resistance (HS+LS=370mΩ)
  • Very low quiescent operating current (typ. 250uA, VDD=3V)
  • Wide operating voltage range (2V~7.5V)
  • Continuous operating current 1.6A
  • Built-in thermal protection with hysteresis
  • ESD rating 8kV (HBM)
  • SOP-16L package

Specifications

Type
Parameter
Type
Parameter
  • Operating voltage VDD
    2V~7V
  • Motor count
    2
  • Peak current
    3A/channel
  • Rds(on)
    0.4Ω/channel
  • Operating Temperature
    -40℃~125℃
  • PWM Speed Control
    √
  • OTP
    √
  • Package
    SOP-16L

Package & Ordering

Ordering Information

Part NumberPackagePackage QtyOperating TemperatureEnvironmental RequirementLead Frame
OCD1216SADSOP-16L4000pcs/reel-40°C ~ 85°CROHSCu

Package & Pin Definition

OCD1216 pin configuration
Pin NamePin No.I/ODescription
NC1, 5--Not connected
INA12IOLogic control input for motor 1
INB13IOLogic control input for motor 1
VDD14PowerPositive power supply input
INA26IOLogic control input for motor 2
INB27IOLogic control input for motor 2
VDD28PowerPositive power supply input
OUTB29PowerMotor 2 drive output
GND10, 11, 14, 15PowerGround (battery negative)
OUTA212PowerMotor 2 drive output
OUTB113PowerMotor 1 drive output
OUTA116PowerMotor 1 drive output