我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OCD1220

1.8V~7V Dual-Channel Brushed Motor Driver

  • Operating voltage VDD1.8V~7V
  • Motor count2
  • Peak current4.5A/channel
  • Rds(on)0.216Ω/channel
  • Operating Temperature-40℃~125℃
  • PWM Speed Control√
TSSOP-16L-EP.jpg
  • Overview
  • Features
  • Specifications
  • Package & Ordering

overview

The OCD1220 is a brushed DC motor driver solution developed for battery-powered toys and motion control applications.

The OCD1220 integrates a dual H-bridge driver circuit built with N-channel and P-channel power MOSFETs, suitable for driving one or two brushed DC motors or stepper motors.

The OCD1220 has a wide operating voltage range, a continuous output current capability of 2.4A in single-channel operation, and supports a peak output current of 4.5A per channel.

The OCD1220 has built-in over-temperature protection. When the load current is far greater than the maximum continuous current, the junction temperature rises rapidly due to the limited package heat dissipation. Once it exceeds the set value (typically 170°C), the internal circuit immediately turns off the output power transistors and cuts off the load current, preventing continuous temperature rise from causing smoke or fire in the plastic package. The built-in thermal hysteresis circuit ensures the circuit can be controlled again only after it recovers to a safe temperature.

The OCD1220 is available in an SOP-16L package, with an operating temperature range from -40°C to 85°C.

Applications

Remote-control toy motor driveSingle-cell lithium battery powered brushed motor drive2-4 cell dry battery powered brushed motor driveLow-voltage H-bridge driver

Typical Application Circuit

OCD1220 Typical Application Circuit

features

  • H-bridge driver with built-in PMOS/NMOS power switches
  • Supports four load motor functions: forward/reverse/stop/brake
  • Very low standby current (typ. 0.1uA)
  • Low on-resistance (HS+LS=216mΩ, VDD=5V)
  • Low quiescent operating current (typ. 465uA, VDD=3.7V)
  • Wide operating voltage range (1.8~7V)
  • Peak current 4.5A per channel
  • Integrated thermal protection
  • ESD rating 8kV (HBM)
  • SOP-16L package

Specifications

Type
Parameter
Type
Parameter
  • Operating voltage VDD
    1.8V~7V
  • Motor count
    2
  • Peak current
    4.5A/channel
  • Rds(on)
    0.216Ω/channel
  • Operating Temperature
    -40℃~125℃
  • PWM Speed Control
    √
  • OTP
    √
  • Package
    SOP-16L

Package & Ordering

Ordering Information

Part NumberPackagePacking QuantityOperating TemperatureEco RequirementLead Frame
OCD1220SADSOP-16L2500pcs/Reel-40°C ~ 85°CRoHSCu

Package & Pin Definition

OCD1220 pin configuration
Pin NamePin No.I/ODescription
NC1, 5IFloating pin, no internal connection
INA1, INB12, 3IMotor 1 logic control inputs
VDD1, VDD24, 8PPositive power supply inputs
INA2, INB26, 7IMotor 2 logic control inputs
OUTA2, OUTB29, 12OMotor 2 drive outputs
GND10, 11, 14, 15GGround (battery negative)
OUTA1, OUTB113, 16OMotor 1 drive outputs