OCD130
2~7.5V Single-Channel Brushed Motor Driver
- Operating voltage VDD2V~7V
- Motor count1
- Peak current4A
- Rds(on)0.23Ω
- Operating Temperature-40℃~125℃
- PWM Speed Control√
-
Overview
-
Features
-
Specifications
-
Package & Ordering
overview
The OCD130 is a brushed DC motor driver solution developed for battery-powered toys and motion control applications.
The OCD130 integrates an H-bridge driver circuit built with N-channel and P-channel power MOSFETs, suitable for driving brushed DC motors or stepper motors. The OCD130 offers a wide operating voltage range, with continuous output current capability of 2.2A and peak output current of 4A.
The OCD130 has built-in over-temperature protection. When the load current is far greater than the maximum continuous current of the circuit, the junction temperature rises rapidly due to the limited heat dissipation of the package. Once it exceeds the set value (typical 170°C), the internal circuit immediately turns off the output power transistors and cuts off the load current, avoiding safety hazards such as smoke or fire of the plastic package caused by continued temperature rise. The built-in thermal hysteresis circuit ensures that the circuit can be controlled again only after it has recovered to a safe temperature.
The OCD130 is available in an SOP-8L package with an operating temperature range of -40°C to 85°C.
Applications
Toy motor driversSingle-cell lithium brushed motor drivers2-4 cell dry battery brushed motor driversLow-voltage H-bridge drivers
features
-
H-bridge driver with built-in PMOS/NMOS power switches
-
Supports four load motor functions: forward/reverse/stop/brake
-
Very low standby current (typ.0.1uA)
-
Low on-resistance (HS+LS=230mΩ)
-
Very low quiescent operating current (typ.200uA, VDD=3V)
-
Wide operating voltage range (2V~7.5V)
-
Continuous operating current 2.2A
-
Built-in thermal protection with hysteresis
-
ESD rating 8kV (HBM)
-
SOP-8L package
Specifications
-
Operating voltage VDD2V~7V
-
Motor count1
-
Peak current4A
-
Rds(on)0.23Ω
-
Operating Temperature-40℃~125℃
-
PWM Speed Control√
-
OTP√
-
PackageSOP-8L
Package & Ordering
Ordering Information
| Part Number | Package | Packing Quantity | Operating Temperature | Eco Requirement | Lead Frame |
|---|---|---|---|---|---|
| OCD130SAD | SOP-8L | 4000pcs/Reel | -40°C ~ 85°C | ROHS | Cu |
Package & Pin Definition
| Pin Name | Pin No. | I/O | Description |
|---|---|---|---|
| NC | 1 | I | Not connected |
| INA | 2 | I | Motor logic control A input |
| INB | 3 | I | Motor logic control B input |
| VDD | 4 | P | Positive power supply input |
| OUTA | 5 | O | Motor drive output A |
| GND | 6 | G | Ground (battery negative) |
| GND | 7 | G | Ground (battery negative) |
| OUTB | 8 | O | Motor drive output B |