OCD130E
2~7V Single-Channel Brushed Motor Driver
- Operating voltage VDD2V~7V
- Motor count1
- Peak current4.5A
- Rds(on)0.24Ω
- Operating Temperature-40℃~125℃
- PWM Speed Control√
-
Overview
-
Features
-
Specifications
-
Package & Ordering
overview
The OCD130E is a brushed DC motor driver IC developed for battery-powered toys and motion control applications.
The OCD130E integrates an H-bridge driver circuit built with N-channel and P-channel power MOSFETs, suitable for driving brushed DC motors or stepper motors. The OCD130E has a wide operating voltage range, supporting 2.55A continuous output current and 4.5A peak output current.
The OCD130E has built-in over-temperature protection. When the load current through the chip is much larger than the maximum continuous current, the junction temperature rises rapidly due to the limited package heat dissipation capability. Once it exceeds the set value (typically 170°C), the internal circuit immediately turns off the output power transistors and cuts off the load current, avoiding safety hazards such as smoke or fire of the plastic package caused by continuously rising temperature. The built-in thermal hysteresis circuit ensures that the circuit is allowed to be controlled again only after it returns to a safe temperature.
The OCD130E is available in an SOP-8L-EP package, with an operating temperature range from -40°C to 85°C.
Applications
Toy motor driveSingle-cell lithium battery brushed motor drive2-4 dry cell battery brushed motor driveLow-voltage H-bridge driver
features
-
H-bridge driver with built-in PMOS/NMOS power switches
-
Supports four load motor functions: forward/reverse/stop/brake
-
Very low standby current (typ. 0.1uA)
-
Low on-resistance (HS+LS=240mΩ)
-
Very low quiescent operating current (typ. 200uA, VDD=3V)
-
Wide operating voltage range (2~7V)
-
Continuous operating current 2.55A
-
Built-in thermal protection with hysteresis
-
ESD rating 8kV (HBM)
-
Available in SOP-8L-EP package
Specifications
-
Operating voltage VDD2V~7V
-
Motor count1
-
Peak current4.5A
-
Rds(on)0.24Ω
-
Operating Temperature-40℃~125℃
-
PWM Speed Control√
-
OTP√
-
PackageSOP-8L-EP
Package & Ordering
Ordering Information
| Part Number | Package | Packing Quantity | Operating Temperature | Environmental Requirement | Frame |
|---|---|---|---|---|---|
| OCD130EESAD | SOP-8L-EP | 4000 pcs/Reel | -40°C ~ 85°C | ROHS | Cu |
Package & Pin Definition
| Pin Name | Pin No. | I/O | Description |
|---|---|---|---|
| NC | 1 | I | No connection |
| INA | 2 | I | Motor logic control A input |
| INB | 3 | I | Motor logic control B input |
| VDD | 4 | P | Positive power supply input |
| OUTA | 5 | O | Motor drive output A |
| GND | 6 | G | Ground (battery negative) |
| GND | 7 | G | Ground (battery negative) |
| OUTB | 8 | O | Motor drive output B |