OCP8230C
Quasi-Resonant Primary-Side Regulation Power Chip with Integrated High-Voltage BJT
- Series DescriptionIsolated PSR Controller
- Features850V(VCBO)
- Power transistor5W
-
Overview
-
Features
-
Specifications
-
Package & Ordering
overview
The OCP8230XXSAD is a high-performance, quasi-resonant primary-side controlled power chip with an integrated high-voltage power BJT, providing high-precision constant-voltage and constant-current output. It is widely used in adapters, chargers and LED constant-current power supplies.
The OCP8230XXSAD operates in primary-side regulation mode, eliminating the optocoupler and TL431. The system operates in DCM, and the adjustable output cable compensation function effectively compensates the voltage drop of the output current across the output cable, giving good load regulation at the cable end.
In constant-voltage mode, quasi-resonant and multi-mode technologies improve efficiency and eliminate audible noise while ensuring excellent dynamic performance. In constant-current mode, the system regulates current by controlling the demagnetization duty cycle, and the output current and power can be adjusted by the resistor on the CS pin.
The OCP8230XXSAD provides comprehensive intelligent protection functions, including cycle-by-cycle over-current protection, output over-voltage protection, output short-circuit protection, over-temperature protection, and single-point failure protection such as FB pull-up/pull-down resistor and CS open/short-circuit.
Applications
Chargers and adaptersConstant-current driversOther auxiliary power supplies
Typical Application Circuit

features
-
Integrated 800V high-voltage power BJT
-
Quasi-resonant (QR) + multi-mode primary-side control
-
Meets Level VI efficiency requirements
-
Meets Level VI low standby power, <75mW
-
CC and CV regulation better than ±5%
-
Cable loss compensation
-
Excellent dynamic response with no audible noise
-
Comprehensive protection: cycle-by-cycle current limit protection (OCP), output short-circuit protection (SLP), output over-voltage protection, VDD over-voltage, under-voltage and clamp protection, over-temperature protection (OTP), single-point failure protection
Specifications
-
Series DescriptionIsolated PSR Controller
-
Features850V(VCBO)
-
Power transistor5W
Package & Ordering
Ordering Information
| Part Number | Package | Packing Quantity | Temperature Range | Eco Grade | Base Material | Applicable Power (Universal Input) |
|---|---|---|---|---|---|---|
| OCP8230CASAD | SOP-8L | 4000pcs | -40~85℃ | Green | Cu | 5W |
| OCP8230EASAD | SOP-8L | 4000pcs | -40~85℃ | Green | Cu | 10W |
| OCP8230FASAD | SOP-8L | 4000pcs | -40~85℃ | Green | Cu | 12W |
Package & Pin Definition
| Name | OCP8230XASAD | OCP8230XBSAD | OCP8230XCSAD | Type | Description |
|---|---|---|---|---|---|
| FB | 3 | 1 | 2 | I | Feedback and demagnetization detection pin |
| GND | 2 | 7 | 7 | P | Chip reference ground |
| VDD | 1 | 3 | 1 | P | Chip power supply pin |
| CS | 4 | 2 | 4 | I | Current sense pin |
| C | 5-8 | 5-6 | 5-6 | I | Collector pin of the integrated high-voltage power transistor |
| E | - | 4 | - | O | Emitter pin of the integrated high-voltage power transistor |