OCP8222A
Isolated Flyback Constant-Power Switching Driver with Dual-Winding Support
- Series DescriptionIsolated SSR Controller
- FeaturesBuilt-in 700V Darlington
- Power transistor25W
- Output PowerSelf-powered
-
Overview
-
Features
-
Specifications
-
Package & Ordering
overview
The OCP8222X is an isolated flyback secondary-side PWM constant-power control IC. It uses SSR control and is suitable for compact chargers and fast-charging power supplies over the full voltage range.
The OCP8222X adopts internal self-supply technology; with a dual-winding transformer, the auxiliary winding can be omitted from the design. It supports a wide output voltage range of 5 to 20V. The OCP8222X integrates a 700V power transistor, a high-voltage start-up resistor and a CS sense resistor. The excellent self-supply technology ensures fast start-up while achieving lower standby power consumption, meeting Level VI efficiency requirements.
The OCP8222X features a constant-power mode that prevents charging interruption caused by excessive charging power. The IC also provides frequency jitter for better EMI performance.
The OCP8222X provides multiple protections: cycle-by-cycle current limit (OCP), output short-circuit protection (SCP), over-temperature power-reduction regulation, VDD over-voltage protection and loop open-circuit protection.
The OCP8222X is available in the SOP-8L package.
Applications
ChargersFast-charging power supplies such as PDOther isolated flyback power supplies
Typical Application Circuit

features
-
Integrated 700V power transistor
-
High efficiency, ultra-low standby power
-
High-voltage self-supply system, no auxiliary winding required
-
Integrated high-voltage start-up resistor and CS resistor
-
Constant-power control
-
Integrated slope compensation
-
85K frequency-ramp soft start
-
Built-in frequency jitter
-
Feedback loop open-circuit protection
-
Output overload and short-circuit protection
-
VCC over-voltage, under-voltage and clamp protection
-
Cycle-by-cycle current limit (OCP)
-
Over-temperature power-reduction regulation (OTP)
-
Leading-edge blanking (LEB)
Specifications
-
Series DescriptionIsolated SSR Controller
-
FeaturesBuilt-in 700V Darlington
-
Power transistor25W
-
Output PowerSelf-powered
Package & Ordering
Ordering Information
| Part Number | Package | Packing Quantity | Eco Grade | Lead Frame |
|---|---|---|---|---|
| OCP8222ASAD | SOP-8L | 4000pcs/reel | Green | Cu |
| OCP8222BSAD | SOP-8L | 4000pcs/reel | Green | Cu |
Package & Pin Definition

| Pin Name | SOP-8L | Description |
|---|---|---|
| GND | 1 | Chip reference ground |
| VCC | 2 | Chip supply pin |
| COMP | 3 | Voltage feedback pin; connects to optocoupler output |
| OB | 4 | Trim/test pin; leave floating in normal application |
| SW | 5, 6, 7, 8 | High-voltage power transistor collector input; connects to primary winding |