我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OCP8222B

Isolated Flyback Constant-Power Switching Driver with Dual-Winding Support

  • Series DescriptionIsolated SSR Controller
  • FeaturesBuilt-in 700V Darlington
  • Power transistor30W
  • Output PowerSelf-powered
SOP8.png
  • Overview
  • Features
  • Specifications
  • Package & Ordering

overview

The OCP8222X is an isolated flyback secondary-side PWM constant-power control IC. It uses SSR control and is suitable for compact chargers and fast-charging power supplies over the full voltage range.

The OCP8222X adopts internal self-supply technology; with a dual-winding transformer, the auxiliary winding can be omitted from the design. It supports a wide output voltage range of 5 to 20V. The OCP8222X integrates a 700V power transistor, a high-voltage start-up resistor and a CS sense resistor. The excellent self-supply technology ensures fast start-up while achieving lower standby power consumption, meeting Level VI efficiency requirements.

The OCP8222X features a constant-power mode that prevents charging interruption caused by excessive charging power. The IC also provides frequency jitter for better EMI performance.

The OCP8222X provides multiple protections: cycle-by-cycle current limit (OCP), output short-circuit protection (SCP), over-temperature power-reduction regulation, VDD over-voltage protection and loop open-circuit protection.

The OCP8222X is available in the SOP-8L package.

Applications

ChargersFast-charging power supplies such as PDOther isolated flyback power supplies

Typical Application Circuit

OCP8222X Typical Application Circuit

features

  • Integrated 700V power transistor
  • High efficiency, ultra-low standby power
  • High-voltage self-supply system, no auxiliary winding required
  • Integrated high-voltage start-up resistor and CS resistor
  • Constant-power control
  • Integrated slope compensation
  • 85K frequency-ramp soft start
  • Built-in frequency jitter
  • Feedback loop open-circuit protection
  • Output overload and short-circuit protection
  • VCC over-voltage, under-voltage and clamp protection
  • Cycle-by-cycle current limit (OCP)
  • Over-temperature power-reduction regulation (OTP)
  • Leading-edge blanking (LEB)

Specifications

Type
Parameter
Type
Parameter
  • Series Description
    Isolated SSR Controller
  • Features
    Built-in 700V Darlington
  • Power transistor
    30W
  • Output Power
    Self-powered

Package & Ordering

Ordering Information

Part NumberPackagePacking QuantityEco GradeLead Frame
OCP8222ASADSOP-8L4000pcs/reelGreenCu
OCP8222BSADSOP-8L4000pcs/reelGreenCu

Package & Pin Definition

OCP8222X pin configuration
Pin NameSOP-8LDescription
GND1Chip reference ground
VCC2Chip supply pin
COMP3Voltage feedback pin; connects to optocoupler output
OB4Trim/test pin; leave floating in normal application
SW5, 6, 7, 8High-voltage power transistor collector input; connects to primary winding