OCP3845
High-Performance Current-Mode Controller
- Series DescriptionIsolated SSR Controller
- FeaturesExternal MOSFET Drive
- Power transistor500W
- Output Power10-30V
-
Overview
-
Features
-
Specifications
-
Package & Ordering
-
Apply
overview
The OCP3845 is a high-performance fixed-frequency current-mode controller. Designed for off-line and DC-DC converter applications, it offers engineers a cost-effective, high-efficiency drive solution with a minimum number of external components.
The OCP3845 integrates an under-voltage lockout (UVLO) circuit featuring a start-up current of less than 1mA, and an internally trimmed high-precision reference for the high-gain error amplifier. Other internal circuits include latching logic, a temperature-compensated oscillator, a pulse-width modulation (PWM) comparator, reference voltage lockout with hysteresis, cycle-by-cycle current limiting, and a high-current totem-pole output driver stage, making it an ideal device for driving N-channel MOSFETs.
The OCP3845 is available in RoHS-compliant SOP-8L/DIP-8L packages.
Applications
Switching power supplies for home appliances and motorsCouplable DC-DC switching power supplies
features
-
Built-in 16V clamp protection Zener diode on the output
-
Low start-up current (<1mA)
-
Automatic feed-forward compensation
-
Latched PWM with cycle-by-cycle current limiting
-
Excellent load response
-
Input under-voltage lockout with hysteresis
-
Double-pulse latch suppression
-
High-current totem-pole output
-
Internally trimmed high-precision reference
-
Switching frequency up to 500KHz
-
Low-impedance error amplifier output
Specifications
-
Series DescriptionIsolated SSR Controller
-
FeaturesExternal MOSFET Drive
-
Power transistor500W
-
Output Power10-30V
Package & Ordering
Ordering Information
| Part Number | Package | Packing Quantity | Temperature Range | Eco Grade | Base Material |
|---|---|---|---|---|---|
| OCP3845SAE | SOP-8L | 4000pcs | -40~125℃ | Green | Cu |
| OCP3845NE | DIP-8L | 50pcs/Tube | -40~125℃ | Green | Cu |
Package & Pin Definition

| Pin Name | SOP-8L/DIP-8L | Type | Description |
|---|---|---|---|
| COMP | 1 | O | Error amplifier output; can be used for loop compensation. |
| VFB | 2 | I | Inverting input of the error amplifier, normally connected to the switching power supply output through a resistor divider network. |
| ISENSE | 3 | I | A sense voltage proportional to the inductor current is applied to this input; the PWM uses this information to control the conduction of the output switch. |
| RT/CT | 4 | I/O | Oscillator frequency and maximum output duty cycle are adjustable by connecting resistor RT to the Vref pin and capacitor CT to ground. Operating frequency up to 1.0MHz. |
| GROUND | 5 | G | Common ground for the control circuit and power supply. |
| OUTPUT | 6 | O | This output directly drives the gate of a power MOSFET. Peak current up to 1.0A is sourced and sunk by this pin. The pin has a built-in 16V clamp Zener diode, and the output switching frequency is half of the oscillator frequency. |
| VCC | 7 | I | Power supply pin; a 0.1uF bypass capacitor is normally required on this pin. |
| VREF | 8 | O | 5V reference output, which supplies charging current to capacitor CT through resistor RT. A 0.1uF bypass capacitor is also required on this pin. |