我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OCP8215W

Secondary-Side Synchronous Rectifier Driver with Pre-Turn-Off Function

  • Series DescriptionSynchronous Rectifier (SR)
  • Output Power3.3V-24V 5A
  • Maximum PowerDCM/CCM/QR
ocp8215w.png
  • Overview
  • Features
  • Specifications
  • Package & Ordering

overview

The OCP8215WAD is a secondary-side synchronous rectifier driver with an integrated pre-turn-off function, suitable for inductor-current continuous mode, critical mode and discontinuous mode (including quasi-resonant mode). By controlling an external MOSFET, it performs secondary-side rectification and significantly improves system efficiency compared with conventional secondary-side diode rectification.

The OCP8215WAD features a dual power-supply system; the internal supply is adjusted through different connections of the VC and VD pins. The device can be configured for high-side or low-side driving to suit different applications.

The OCP8215WAD includes multiple turn-on detection schemes that effectively distinguish normal turn-off waveforms from ringing waveforms without external components, thereby avoiding abnormal conduction of the synchronous rectifier.

Applications

PD chargersAdapters

Typical Application Circuit

OCP8215WAD Typical Application Circuit

features

  • Integrated pre-turn-off function, compatible with continuous, critical and discontinuous conduction modes (including quasi-resonant mode)
  • Configurable for high-side or low-side driving
  • Integrated 150V high-voltage supply and detection circuits, with built-in intelligent dual-path VCC supply module
  • Supports 3.3V-24V wide output voltage range, suitable for fast charging with QC, PD and other protocols
  • 210µA quiescent operating current
  • Fast turn-on and turn-off delay (less than 30ns)
  • Intelligent ringing blanking ensures proper turn-on and turn-off of the synchronous MOSFET
  • Drive clamp control before chip start-up
  • Compact SOT23-6L package

Specifications

Type
Parameter
Type
Parameter
  • Series Description
    Synchronous Rectifier (SR)
  • Output Power
    3.3V-24V 5A
  • Maximum Power
    DCM/CCM/QR

Package & Ordering

Ordering Information

Part NumberPackagePacking QuantityTemperature RangeEco PlanLead Frame
OCP8215WADSOT23-6L3000pcs-40~85℃GreenCu

Package & Pin Definition

OCP8215WAD pin configuration
Pin No.NameI/ODescription
1VCIInternal supply configuration pin, used to configure the VCC operating voltage
2GNDPChip reference ground, connected to the source of the external MOSFET
3NC-Floating
4VCCPInternal supply output; requires an external capacitor of at least 2.2μF to ground
5GATEOConnected to the gate of the external MOSFET to drive the power switch
6VDIConnected to the drain of the external MOSFET for drain voltage sensing