我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OCP8206B

Non-Isolated Switching Power Supply Driver IC

  • Series DescriptionNon-isolated CV
  • Features800V BJT
  • Power transistor5-24V 500mA
SOP8.png
  • Overview
  • Features
  • Specifications
  • Package & Ordering
  • Apply

overview

The OCP8206XSAD is a high-performance, low-standby-power non-isolated AC-DC power driver IC with an integrated high-voltage power transistor, providing high-accuracy constant-voltage output. It is suitable for 85-265VAC input applications.

The OCP8206XSAD uses quasi-resonant and multi-mode technology to improve efficiency and eliminate audible noise while ensuring excellent dynamic response. The integrated peak current detection adjusts automatically according to the actual load, effectively reducing standby power consumption.

In addition, the output voltage can be adjusted through the VS resistor, and the output current and power can be adjusted through the resistor on the CS pin.

The OCP8206XSAD provides extremely comprehensive intelligent protection functions, including cycle-by-cycle over-current protection, output over-voltage protection, output short-circuit protection, over-temperature protection, and single-point failure protection such as VS pull-up/pull-down resistor and CS open/short circuit.

The OCP8206XSAD is available in an SOP-8 package.

Applications

Auxiliary power supply for small home appliancesAuxiliary power supply for motor drivesSmart home and smart lighting

Typical Application Circuit

OCP8206XSAD Typical Application Circuit

features

  • Integrated 800V high-voltage power transistor
  • Quasi-resonant (QR) + multi-mode primary-side control
  • Meets Level 6 low standby power < 75mW
  • Constant-voltage regulation better than ±5%
  • Excellent dynamic response with no audible noise
  • Comprehensive integrated protection: cycle-by-cycle current limit protection (OCP), output short-circuit protection (SLP), output over-voltage protection, VDD over-voltage, under-voltage and clamp protection, over-temperature protection (OTP), single-point failure protection

Specifications

Type
Parameter
Type
Parameter
  • Series Description
    Non-isolated CV
  • Features
    800V BJT
  • Power transistor
    5-24V 500mA

Package & Ordering

Ordering Information

Part NumberPackagePacking QuantityTemperature RangeEnvironmental GradeBase MaterialApplicable Power (Full Voltage)
OCP8206ASADSOP-8L4000pcs-40~85℃GreenCu6W
OCP8206BSADSOP-8L4000pcs-40~85℃GreenCu12W

Package & Pin Definition

OCP8206XSAD pin configuration
Pin NameSOP-8LTypeDescription
VDD1PChip power supply pin
GND2PChip reference ground
VS3IFeedback and demagnetization detection pin
CS4ICurrent sense pin
D5-8IIntegrated high-voltage power transistor pin