OCP8207D
Non-Isolated Buck Switching Driver with Integrated Controller
- Series DescriptionNon-isolated CV
- Features500V 8.5Ω
- Power transistor5-24V 250MA
-
Overview
-
Features
-
Specifications
-
Package & Ordering
-
Apply
overview
The OCP8207X is a high-performance, low-cost PWM-controlled power switch driver IC. It adopts PWM+PFM multi-mode control to improve and optimize efficiency and standby performance while also reducing operating noise.
The OCP8207X requires a simple peripheral circuit with few components. Its high-precision internal constant-current and constant-voltage control modules and complete protection functions make it well suited to low-power non-isolated power supply applications. The IC integrates a 500V high-voltage MOSFET.
The OCP8207X provides rich protection functions, including VCC over-voltage/under-voltage protection, output over-voltage and overload protection, over-temperature protection and CS pin short-circuit protection, which further improve system reliability.
The OCP8207X is available in an SOP-8L package.
Applications
Small home appliancesAuxiliary power suppliesSmart lighting solutions
Typical Application Circuit

features
-
Integrated 500V power MOSFET
-
High efficiency, ultra-low standby power
-
Excellent line/load regulation
-
Excellent dynamic response
-
12V output by default when FB is floating
-
High-voltage supply system, saves VCC start-up resistor
-
No loop compensation capacitor required
-
PWM+PFM multi-mode primary-side control
-
Cycle-by-cycle current limit protection, CS pin open/short protection
-
Output overload and short-circuit protection
-
VCC over-voltage, under-voltage and clamp protection
-
Output over-voltage protection (OVP)
-
Cycle-by-cycle over-current protection (OCP)
-
Over-temperature protection (OTP)
-
Leading-edge blanking (LEB)
Specifications
-
Series DescriptionNon-isolated CV
-
Features500V 8.5Ω
-
Power transistor5-24V 250MA
Package & Ordering
Ordering Information
| Part Number | Package | Package Qty | Eco Plan | Lead Frame | Recommended Output Current (5-24V Output) |
|---|---|---|---|---|---|
| OCP8207CSAD | SOP-8L | 4000 pcs/Reel | Green | Cu | ≤180mA |
| OCP8207DSAD | SOP-8L | 4000 pcs/Reel | Green | Cu | ≤250mA |
| OCP8207ESAD | SOP-8L | 4000 pcs/Reel | Green | Cu | ≤350mA |
| OCP8207FSAD | SOP-8L | 4000 pcs/Reel | Green | Cu | ≤500mA |
Package & Pin Definition

| Pin SOP-8L | Name | Description |
|---|---|---|
| 1 | VCC | Chip power supply pin |
| 2 | GND | Chip reference ground |
| 3 | FB | Voltage sense pin; output defaults to 12V when floating |
| 4 | CS | Inductor peak current sense pin |
| 5, 6, 7, 8 | D | Drain terminal of the internal power switch |