OCP8208E
Non-Isolated Buck Switching Driver Controller
- Series DescriptionNon-isolated CV
- Features650V 4.5Ω
- Power transistor5-24V 350MA
-
Overview
-
Features
-
Specifications
-
Package & Ordering
-
Apply
overview
The OCP8208X is a high-performance, low-cost PWM-controlled power switch driver IC. It uses PWM+PFM multi-mode control to improve and optimize efficiency and standby performance while also reducing operating noise.
The OCP8208X requires simple peripheral circuits and few components. Its internal high-precision constant-current and constant-voltage control modules and complete protection functions make it well suited for low-power non-isolated power supply applications. The device integrates a 650V high-voltage MOSFET.
The OCP8208X offers rich protection functions, including VCC over-voltage/under-voltage protection, output over-voltage and overload protection, over temperature protection and CS pin short-circuit protection, which further improve system reliability.
The OCP8208X is available in an SOP-8L package.
Applications
Small appliancesAuxiliary power suppliesSmart lighting solutions
Typical Application Circuit

features
-
Integrated 650V power MOSFET
-
High efficiency, ultra-low standby power consumption
-
Excellent line/load regulation
-
Excellent dynamic response
-
Default 12V output when FB is floating
-
High-voltage power supply system, saves VCC start-up resistor
-
No loop compensation capacitor required
-
PWM+PFM multi-mode primary-side control
-
Cycle-by-cycle current limit protection, CS pin open/short-circuit protection
-
Output overload and short-circuit protection
-
VCC over-voltage, under-voltage and clamp protection
-
Output over-voltage protection OVP
-
Cycle-by-cycle current limit OCP
-
Over temperature protection OTP
-
Leading edge blanking LEB
Specifications
-
Series DescriptionNon-isolated CV
-
Features650V 4.5Ω
-
Power transistor5-24V 350MA
Package & Ordering
Ordering Information
| Part Number | Package | Package Qty | Eco Plan | Base Material | Recommended Output Current for 5-24V Output |
|---|---|---|---|---|---|
| OCP8208CSAD | SOP-8L | 4000pcs/reel | Green | Cu | ≤180mA |
| OCP8208DSAD | SOP-8L | 4000pcs/reel | Green | Cu | ≤250mA |
| OCP8208ESAD | SOP-8L | 4000pcs/reel | Green | Cu | ≤350mA |
| OCP8208FSAD | SOP-8L | 4000pcs/reel | Green | Cu | ≤500mA |
Package & Pin Definition

| Pin | Name | Description |
|---|---|---|
| 1 | VCC | Power supply pin |
| 2 | GND | Reference ground |
| 3 | FB | Voltage sense pin; output defaults to 12V when floating |
| 4 | CS | Inductor peak current sense pin |
| 5, 6, 7, 8 | D | Drain of the internal power switch |