OCP8197F
Non-Isolated Buck LED Constant-Current Driver with PWM Dimming
- Series DescriptionOCP8197F
- MOS withstand voltage500V
- IPK current2.5Ω
- Recommended current/Vout=72V260mA/350mA
- PackageSOP-8/DIP-7
-
Overview
-
Features
-
Specifications
-
Package & Ordering
-
Apply
overview
The OCP8197X is a buck LED constant-current driver for non-isolated LED applications with a universal 85-264VAC input range, especially suitable for applications requiring PWM dimming.
The OCP8197X supports PWM signal dimming with excellent dimming current accuracy and linearity, making it well suited for low-ripple, flicker-free smart LED lighting solutions.
The OCP8197X integrates a high-voltage JFET startup circuit and power supply system, which speeds up system startup and saves the conventional startup resistor and VCC supply capacitor, making the system simpler and more stable.
The OCP8197X has a unique built-in high-precision current sensing circuit that delivers accurate LED constant-current output while also maintaining good line regulation. Because the device operates in critical conduction mode of the inductor current, the output current does not vary with inductance or LED operating voltage, and load regulation is also excellent.
The OCP8197X integrates multiple protection features, including LED short-circuit protection, output overvoltage protection (OVP), and over-temperature current foldback (OTP).
The OCP8197X is available in SOP-8L/DIP-7L packages.
Applications
LED panel lights, LED ceiling lightsT8/T5 tube lightsSmart LED driver solutions requiring dimming
Typical Application Circuit

features
-
PWM continuous dimming range 1%-100%
-
Flicker-free dimming
-
85VAC-264VAC universal input voltage range
-
Excellent line/load regulation
-
Critical conduction mode for high performance
-
Built-in 500V power MOSFET
-
High-voltage supply system saves VCC startup resistor and capacitor
-
No loop compensation capacitor required
-
Wide dimming frequency range of 0.5-4KHz
-
Low standby power consumption
-
LED output short-circuit protection
-
LED output overvoltage protection (OVP)
-
Cycle-by-cycle current limit (OCP)
-
Over-temperature protection (OTP)
-
Leading edge blanking (LEB)
Specifications
-
Series DescriptionOCP8197F
-
MOS withstand voltage500V
-
IPK current2.5Ω
-
Recommended current/Vout=72V260mA/350mA
-
PackageSOP-8/DIP-7
Package & Ordering
Ordering Information
| Part Number | Package | Packing Quantity | Eco Grade | Base Material | Recommended Max Output Current (Full Voltage Range) 36V Output | Recommended Max Output Current (Full Voltage Range) 72V Output |
|---|---|---|---|---|---|---|
| OCP8197ESADM | SOP-8L | 4000 pcs/Reel | Green | Cu | 250mA | 200mA |
| OCP8197FSADM | SOP-8L | 4000 pcs/Reel | Green | Cu | 350mA | 260mA |
| OCP8197ENDM | DIP-7L | 50 pcs/Tube | Green | Cu | 380mA | 300mA |
| OCP8197FNDM | DIP-7L | 50 pcs/Tube | Green | Cu | 450mA | 350mA |
| OCP8197GNDM | DIP-7L | 50 pcs/Tube | Green | Cu | 500mA | 400mA |
Package & Pin Definition

| SOP-8L | DIP-7L | Name | Description |
|---|---|---|---|
| 8 | 1 | CS | Current sense pin |
| 5 | 6,7 | D | Drain of the internal power switch |
| 4 | 5 | HV | High-voltage supply pin |
| 3,6 | NC | Not connected | |
| 2 | 3 | GND | Chip reference ground |
| 1 | 4 | OVP | External OVP voltage setting pin |
| 7 | 2 | PWM | PWM dimming signal input |