我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OCP8166E

Non-Isolated LED Constant-Current Driver with Power Factor Correction

  • Series DescriptionOCP8166E
  • MOS withstand voltage500V
  • IPK current5.2Ω
  • Recommended current/Vout=120V130MA
  • PackageSOP-7
SOP7.png
  • Overview
  • Features
  • Specifications
  • Package & Ordering
  • Apply

overview

The OCP8166X is a non-isolated buck LED constant-current driver with active power factor correction, suitable for applications with a full-range input voltage of 85-264VAC. The chip operates in critical conduction mode, giving excellent system efficiency; the integrated active power factor correction circuit both improves the power factor of the LED power supply and reduces total harmonic distortion.

The high-voltage JFET startup circuit and power supply system of the OCP8166X speed up system startup and eliminate the startup resistor and VCC supply capacitor required in conventional applications, making the system simpler and more stable.

The OCP8166X integrates a high-precision current sensing circuit, which provides accurate LED constant-current output while also maintaining good line regulation. Because the chip operates in inductor-current critical mode, the output current does not vary with the inductance or the LED operating voltage, and the system also delivers excellent load regulation.

The OCP8166X provides multiple protection mechanisms, including LED short-circuit protection, LED open-circuit protection (OVP), over-temperature current reduction, cycle-by-cycle current limit (OCP) and over-temperature protection (OTP).

The OCP8166X is available in an SOP-7 package, with an operating temperature range from -40°C to 85°C.

Applications

LED panel lights, downlights, bulb lampsT8/T5 tubesLED driver solutions requiring power factor correction

Typical Application Circuit

OCP8166X Typical Application Circuit

features

  • Active power factor correction technology
  • Power factor > 0.9 over the full voltage range
  • Harmonics meet IEC61000-3-2 Class C
  • Excellent line and load regulation
  • Critical conduction mode for high system performance
  • Built-in 500V power MOSFET
  • High-voltage supply system, no VCC startup resistor or capacitor needed
  • No loop compensation capacitor required
  • External enable control
  • Multiple protection functions: LED open-circuit and short-circuit protection, over-temperature current reduction, cycle-by-cycle current limit OCP, externally adjustable OVP, over-temperature protection OTP, leading edge blanking LEB

Specifications

Type
Parameter
Type
Parameter
  • Series Description
    OCP8166E
  • MOS withstand voltage
    500V
  • IPK current
    5.2Ω
  • Recommended current/Vout=120V
    130MA
  • Package
    SOP-7

Package & Ordering

Ordering Information

Part NumberPackagePackage QtyEco PlanBase MaterialRecommended Max Output Current at Full Voltage @72V
OCP8166ESADMSOP-713-in reel 4000pcs/reelGreenCu130mA
OCP8166FSADMSOP-713-in reel 4000pcs/reelGreenCu200mA
OCP8166GSADMSOP-713-in reel 4000pcs/reelGreenCu280mA

Package & Pin Definition

OCP8166X pin configuration
Pin NameSOP-7LDescription
CS7Current sense pin
D5/6Drain of the internal power MOSFET
HV4High-voltage supply pin of the chip
NC3Floating
GND2Chip reference ground
ROVP/EN1External OVP voltage setting pin of the chip; can also be used for chip enable control

Series of product applications