OCP8166F
Non-Isolated LED Constant-Current Driver with Power Factor Correction
- Series DescriptionOCP8166F
- MOS withstand voltage500V
- IPK current3.3Ω
- Recommended current/Vout=120V200MA
- PackageSOP-7
-
Overview
-
Features
-
Specifications
-
Package & Ordering
-
Apply
overview
The OCP8166X is a non-isolated buck LED constant-current driver with active power factor correction, suitable for applications with a full-range input voltage of 85-264VAC. The chip operates in critical conduction mode, giving excellent system efficiency; the integrated active power factor correction circuit both improves the power factor of the LED power supply and reduces total harmonic distortion.
The high-voltage JFET startup circuit and power supply system of the OCP8166X speed up system startup and eliminate the startup resistor and VCC supply capacitor required in conventional applications, making the system simpler and more stable.
The OCP8166X integrates a high-precision current sensing circuit, which provides accurate LED constant-current output while also maintaining good line regulation. Because the chip operates in inductor-current critical mode, the output current does not vary with the inductance or the LED operating voltage, and the system also delivers excellent load regulation.
The OCP8166X provides multiple protection mechanisms, including LED short-circuit protection, LED open-circuit protection (OVP), over-temperature current reduction, cycle-by-cycle current limit (OCP) and over-temperature protection (OTP).
The OCP8166X is available in an SOP-7 package, with an operating temperature range from -40°C to 85°C.
Applications
LED panel lights, downlights, bulb lampsT8/T5 tubesLED driver solutions requiring power factor correction
Typical Application Circuit

features
-
Active power factor correction technology
-
Power factor > 0.9 over the full voltage range
-
Harmonics meet IEC61000-3-2 Class C
-
Excellent line and load regulation
-
Critical conduction mode for high system performance
-
Built-in 500V power MOSFET
-
High-voltage supply system, no VCC startup resistor or capacitor needed
-
No loop compensation capacitor required
-
External enable control
-
Multiple protection functions: LED open-circuit and short-circuit protection, over-temperature current reduction, cycle-by-cycle current limit OCP, externally adjustable OVP, over-temperature protection OTP, leading edge blanking LEB
Specifications
-
Series DescriptionOCP8166F
-
MOS withstand voltage500V
-
IPK current3.3Ω
-
Recommended current/Vout=120V200MA
-
PackageSOP-7
Package & Ordering
Ordering Information
| Part Number | Package | Package Qty | Eco Plan | Base Material | Recommended Max Output Current at Full Voltage @72V |
|---|---|---|---|---|---|
| OCP8166ESADM | SOP-7 | 13-in reel 4000pcs/reel | Green | Cu | 130mA |
| OCP8166FSADM | SOP-7 | 13-in reel 4000pcs/reel | Green | Cu | 200mA |
| OCP8166GSADM | SOP-7 | 13-in reel 4000pcs/reel | Green | Cu | 280mA |
Package & Pin Definition

| Pin Name | SOP-7L | Description |
|---|---|---|
| CS | 7 | Current sense pin |
| D | 5/6 | Drain of the internal power MOSFET |
| HV | 4 | High-voltage supply pin of the chip |
| NC | 3 | Floating |
| GND | 2 | Chip reference ground |
| ROVP/EN | 1 | External OVP voltage setting pin of the chip; can also be used for chip enable control |