OCP8156A
High-Precision Primary-Side Regulation Constant-Current Controller
- Series DescriptionOCP8156A
- BJT withstand voltage800V
- On-resistance0.36A
- Recommended power9W
- PackageSOP-8
-
Overview
-
Features
-
Specifications
-
Package & Ordering
-
Apply
overview
The OCP8156X is a cost-effective, self-powered constant-current driver IC for LED power supplies. It offers excellent line regulation, load regulation and output current accuracy, and is widely used in various LED drivers.
The OCP8156X adopts an isolated flyback PSR topology and operates stably without an auxiliary winding for power supply. The IC works in discontinuous conduction mode (DCM), and the application solution can meet LED driver requirements with output power in the range of 9-36W.
The OCP8156X integrates a high-voltage BJT, so the RCD circuit used to absorb the leakage-inductance voltage spike can be omitted in flyback applications, giving a low component count and low BOM cost.
The OCP8156X provides rich protection functions, including cycle-by-cycle current limiting, VCC under-voltage protection, output over-voltage protection, output short-circuit protection and over-temperature protection.
The IC is available in SOP-8L and DIP-7L packages, with an operating temperature range from -40°C to 85°C.
Applications
LED downlights and spotlightsLED panel lightsLED bulb lightsLED T5 and T8 tubesOther LED lighting
Typical Application Circuit

features
-
VCC under-voltage protection
-
Self-powered IC, no auxiliary supply winding required
-
Integrated high-voltage NPN, maximum voltage 800V
-
Input line regulation < ±3%
-
LED output constant-current accuracy < ±3%
-
Output open-circuit protection, supports floating or grounded connection, simple control
-
Output short-circuit protection with very low short-circuit standby power
-
Cycle-by-cycle current limiting
-
Excellent noise immunity
-
OTP over-temperature protection with smooth current reduction and no light flicker
-
Very few external components, ultra-low BOM cost
Specifications
-
Series DescriptionOCP8156A
-
BJT withstand voltage800V
-
On-resistance0.36A
-
Recommended power9W
-
PackageSOP-8
Package & Ordering
Ordering Information
| Part Number | Max Output Power | Package | Package Qty | Temperature Range | Eco Plan | Lead Frame |
|---|---|---|---|---|---|---|
| OCP8156A | 12W | SOP-8L | 4000 pcs | -40~85℃ | Green | Cu |
| OCP8156B | 18W | SOP-8L | 4000 pcs | -40~85℃ | Green | Cu |
| OCP8156C | 22W | SOP-8L | 4000 pcs | -40~85℃ | Green | Cu |
| OCP8156C | 24W | DIP-7L | 50pcs/Tube | -40~85℃ | Green | Cu |
| OCP8156D | 36W | DIP-7L | 50pcs/Tube | -40~85℃ | Green | Cu |
Package & Pin Definition

| Pin Name | SOP-8L | DIP-7L | Type | Description |
|---|---|---|---|---|
| VCC | 1 | 1 | P | Chip power supply pin |
| CS | 2 | 2 | I | Current sense pin |
| ROVP | 3 | 3 | I | OVP voltage setting pin |
| GND | 4 | 4 | P | Chip ground pin |
| NC | 5-6 | 5 | No connection (floating) pin | |
| C | 7-8 | 7-8 | I | Collector pin of the integrated high-voltage BJT |