我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OCP8156B

Non-Isolated Buck LED Constant-Current Driver

  • Series DescriptionOCP8156B
  • BJT withstand voltage800V
  • On-resistance0.63A
  • Recommended power12W
  • PackageSOP-8
SOP8.png
  • Overview
  • Features
  • Specifications
  • Package & Ordering
  • Apply

overview

The OCP8156B is a cost-effective, self-powered constant-current LED driver IC with excellent line regulation, load regulation and high output current accuracy, widely used in various LED lighting applications.

The OCP8156B adopts an isolated flyback PSR topology and works stably without an auxiliary supply winding. The IC operates in discontinuous conduction mode (DCM) and can deliver 3W~18W of output power for LED driver applications over the full input range of 85Vac~264Vac.

The OCP8156B integrates a high-voltage BJT, so the RCD circuit used to absorb the leakage-inductance voltage spike can be omitted in flyback applications, resulting in a low component count and low BOM cost with high cost-effectiveness.

The OCP8156B provides rich protection functions, including cycle-by-cycle current limiting, VCC under-voltage protection, output over-voltage protection, output short-circuit protection and over-temperature protection.

Applications

LED downlights and spotlightsLED panel lightsLED bulb lampsLED T5 and T8 tubesOther LED lighting

Typical Application Circuit

OCP8156B Typical Application Circuit

features

  • VCC under-voltage protection
  • Self-powered IC, no auxiliary supply winding required
  • Integrated 800V high-voltage NPN
  • Line regulation < ±3%
  • LED output constant-current accuracy < ±3%
  • Output open-circuit protection, supports floating or grounded configuration, simple control
  • Output short-circuit protection with very low short-circuit standby power
  • Cycle-by-cycle current limiting
  • Excellent noise immunity
  • OTP over-temperature protection with smooth current reduction and no light flicker
  • Minimal external components, ultra-low BOM cost

Specifications

Type
Parameter
Type
Parameter
  • Series Description
    OCP8156B
  • BJT withstand voltage
    800V
  • On-resistance
    0.63A
  • Recommended power
    12W
  • Package
    SOP-8

Package & Ordering

Ordering Information

Part NumberMax Output PowerPackagePacking QuantityTemperature RangeEnvironmental GradeBase Material
OCP8156B18WSOP-8L4000pcs/Reel-40~85℃GreenCu

Package & Pin Definition

OCP8156B pin configuration
Pin NameSOP-8LTypeDescription
VCC1PChip power supply pin
CS2ICurrent sense pin
ROVP3IOVP voltage setting pin
GND4PChip ground pin
NC5-6Chip no-connect (floating) pin
C7-8IIntegrated high-voltage BJT collector pin

Series of product applications