我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OPS1121B

Qi 1.2.4-Compliant 3W High-Efficiency Wireless Charging Receiver IC

  • WPC ProtocolQI BPP 5W
  • EEPROM Size256 Bytes
  • Operation ModeBattery Charge
  • Maximum Output Voltage4.2/4.35/4.4V (programmable)
  • Maximum Output Current0.6A
  • Input Voltage≤20V
OPS1121B.jpg
  • Overview
  • Features
  • Specifications
  • Package & Ordering
  • Apply

overview

The OPS1121B is a highly integrated, high-efficiency, low-power wireless charging receiver IC for Qi BPP. It integrates a wireless receiving full-bridge rectifier, linear regulator, charging power management, Qi wireless charging protocol and a wired switching path. The OPS1121B requires only a few external components and no firmware programming, with stable and reliable performance, enabling a minimalist low-power wireless charging receiver solution.

The OPS1121B can configure the charging current of each TC/CC stage via I2C. The chip supports dynamic adjustment of the Vrect output for the best dynamic switching response and heavy-load efficiency. In the CC stage, the rectified output dynamically tracks the battery voltage for high-efficiency fast charging. It also supports external NTC for temperature protection, as well as UVLO, OVP and OTP protections. The on-chip EEPROM allows adjustment of all key charging parameters, adapting to various small coils with strong Qi certification compatibility.

The OPS1121B integrates a wired switching path that automatically detects wired power insertion and switches automatically between wired and wireless charging modes. The chip integrates highly reliable wired over-voltage and over-current protection.

The OPS1121B is available in a 3mm x 3mm QFN-16pin package, supports I2C configuration, and can implement a single-LED indication mode.

Applications

Personal care productsTWS charging cases and other portable charging casesConsumer electronics wearable devicesSmart watchesWireless keyboards and mice

features

  • Compliant with WPC Qi 1.2.4 standard, maximum output power 3W
  • Integrated wireless charging receiver protocol, ASK communication, synchronous rectification, CHG battery management
  • CHG supports typical output voltages of 4.20V/4.35V/4.45V (Note: only one of these voltages can be supported at a time), maximum constant-current output of 600mA
  • Dynamic rectified output voltage for fast load response and high heavy-load efficiency; rectified output dynamically tracks battery voltage in CC and CV heavy-load stages
  • Highly reliable architecture with rectifier output over-voltage clamp protection; supports input over-voltage, output over-current, internal/external over-temperature protection, programmable temperature control, indication and fault detection
  • Supports programming of key parameters for flexible configuration of protocol and chip parameters
  • Minimal external components, only 13 resistors and capacitors required
  • Supports automatic switching between wired and wireless modes, integrates all power MOSFETs
  • Supports I2C interface for program upgrade and debugging
  • Supports single-LED indication
  • 3mm x 3mm 0.5pitch QFN 16pin package

Specifications

Type
Parameter
Type
Parameter
  • WPC Protocol
    QI BPP 5W
  • EEPROM Size
    256 Bytes
  • Operation Mode
    Battery Charge
  • Maximum Output Voltage
    4.2/4.35/4.4V (programmable)
  • Maximum Output Current
    0.6A
  • Input Voltage
    ≤20V
  • OVP/OCP/OTP
    Yes
  • Packaging
    QFN3X3-16

Package & Ordering

Ordering Information

Part NumberMarkingPackage TypePackage QtyTemperatureEco PlanLead
OPS1121BCCX1121BQFN3030-16L3000pcs-40~85°CGreenSn