OPS1036A
Fully Integrated Wireless Charging Transmitter SoC for Power Banks
- WPC ProtocolQI 2.0
- USB ProtocolQC3.0/PD3.0
- Input Voltage3 ~ 19V
- Output Power≤15W
- ASK decoderVoltage/Current/Phase
- Number of Charging LoadsSingle
-
Overview
-
Features
-
Specifications
-
Package & Ordering
overview
The OPS1036A is a wireless charging transmitter chip compliant with the QI2.0 MPP protocol. It integrates a full bridge and driver, a high-performance MCU, three-way adaptive voltage/current/phase decoding, low-power high-precision Q-value detection, high-precision PWM, a QC controller and other core wireless charging modules in a single chip.
The OPS1036A has a built-in 32-bit MCU with a maximum operating frequency of 24MHz, providing 64KB Flash and 8KB SRAM. It supports a 12-bit ADC with 8 external input channels, one 16-bit advanced controller and four general-purpose 16-bit timers, and provides up to 14 GPIOs.
The OPS1036A supports standby at battery voltages above 2.7V, object detection (OD) and a sleep current of less than 15uA. With the built-in full-bridge MOS and customized Dither function, it enables a QI2.0 wireless power bank solution with a minimal peripheral component count, low temperature rise and high performance.
The OPS1036A provides fast hardware and software OCP, OVP, UVP and OTP solutions, ensuring stable operation of the chip over -20℃~85℃. The chip is available in a 5x5mm QFN 40-pin package.
features
-
VIN&PVIN input voltage: 3V to 18V
-
Supports all QI 1.2/1.3/2.0 protocol power levels: 5V2A: 5W/7.5W; 9V2A: 5W/7.5W/10W/15W; 12V1.5A: 5W/7.5W/10W/15W
-
Integrated ultra-low-resistance wireless charging full-bridge MOSFET (Rdson 17mΩ)
-
Integrated three-way adaptive voltage/current/phase decoding
-
Integrated high-precision PWM generator up to 144MHz
-
Integrated QC 2.0/3.0 controller
-
Sleep current less than 15uA
-
Supports low-voltage high-precision Q-value detection
-
Supports FSK modulation and Dither function
-
24MHz 32-bit MCU
-
64KB Flash, 8KB SRAM, 14 GPIOs
-
Supports fast OCP/OVP/OTP protection
Specifications
-
WPC ProtocolQI 2.0
-
USB ProtocolQC3.0/PD3.0
-
Input Voltage3 ~ 19V
-
Output Power≤15W
-
ASK decoderVoltage/Current/Phase
-
Number of Charging LoadsSingle
-
MOS IntegratedYes
-
Flash Size64KB
-
Boost Controller IntegratedNo
-
PackagingQFN 5x5 40pin
Package & Ordering
Ordering Information
| Part Number | Marking | Package Type | Package Qty | Temperature | Eco Plan | Lead |
|---|---|---|---|---|---|---|
| OPS1036A | OPS1036A | QFN5050-40L | 3000pcs | -40~85℃ | Green | Sn |