我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OCP8027

Triple-Output RGB LED Driver with I2C interface

  • Vin2.5V~5.5V
  • lout5mA/10mA/15mA/30mA
  • channels3
  • current accuracy0.03
  • current matching0.03
  • PackageDFN1515-8L
ocp8027.png
  • Overview
  • Features
  • Specifications
  • Package & Ordering
  • Apply

overview

OCP8027 is a three channels constant current LED driver with auto charging indication function. The maximum output current is 4-level selectable (5mA/10mA/15mA/29.5mA). The driving current of each LED has 16 current levels configurable so as to achieve 4096 color mixing. The 256-level exponential PWM dimming creates fine and smooth dimming effect even in low brightness.

OCP8027 can provide auto charging indication under the condition of low battery voltage. When the voltage of battery is too low, and the I2C interface halts, the internal pattern controller will be activated by pulling pin CHRG to high, and pin LED1 will output blinking lighting.

OCP8027 contains three independent pattern controllers. All LEDs can be controlled to work synchronously or individually due to the practical application.

An I²C compatible interface in 1MHz fast mode is provided, the device address is 0x64, and continuously writing and reading the internal registers is supported.

OCP8027 is available in a 1.5mm×1.5mm DFN-8L package.

Applications

RGB LED driversSmart PhoneTWSSmart home applianceE-sport devices

Typical Application Circuit

OCP8027 Typical Application Circuit

features

  • 3-channel constant current LED drivers; 4-level global maximum current: 5mA, 10mA, 15mA, 29.5mA; 16-level individual current, 4096 mixed color available; 256-level individual PWM dimming
  • Automatic breathing lighting; Three individual pattern controllers; Individual and sync control selectable
  • LED current accuracy: ±3%
  • LED matching accuracy: ±3%
  • Low dropout voltage: 50mV
  • Low power consumption; ISB < 5uA in standby mode
  • UVLO and OTP protection
  • Support charging indication under low battery voltage condition; Directly start up blinking on LED1 via pulling pin CHRG up to high; OCP8027A: Blink period 2s, max output current 6mA; OCP8027B: Breathing period 4.6s, max output current 6mA; OCP8027C: LED1 always on, output current 3mA
  • Single power supply, 2.5V~5.5V
  • 1.2V~3.3V, 1MHz I2C interface (address 0x64)
  • 1.5mm×1.5mm DFN-8L package

Specifications

Type
Parameter
Type
Parameter
  • Vin
    2.5V~5.5V
  • lout
    5mA/10mA/15mA/30mA
  • channels
    3
  • current accuracy
    0.03
  • current matching
    0.03
  • Package
    DFN1515-8L

Package & Ordering

Ordering Information

Part NumberPackage DrawingPackage TypePackage QtyEco PlanLead/Ball Finish
OCP8027AVADTYDFN1515-8L7-in reel 3000pcs/reelGreenSn
OCP8027BVADTMDFN1515-8L7-in reel 3000pcs/reelGreenSn
OCP8027CVADTPDFN1515-8L7-in reel 3000pcs/reelGreenSn

Package & Pin Definition

OCP8027 pin configuration