我们非常重视您的个人隐私,当您访问我们的网站时,请同意使用的所有cookie。有关个人数据处理的更多信息可访问《隐私条款》

OCP93020

USB2.0 High Speed and Audio/USB/UART Switch

  • Part No.OCP93020
  • Vin2.7V~5.5V
  • USB BW950MHz
  • Audio THD+N﹣108dB
  • Audio Ron1Ω
  • 3/4 pole detectionNO
ocp93020fqad.png
  • Overview
  • Features
  • Specifications
  • Package & Ordering
  • Apply

overview

The OCP93020 is dual SPDT (Single Pole / Double Throw) switch which combines low distortion audio/USB/UART and USB 2.0 high-speed data signal switching in the same low voltage device. This architecture is designed to allow negative signal passing as low as 3 V below ground. When a voltage is detected on VBUS, the OCP93020 will immediately switch to USB mode.

Due to ultra-low capacitance design, the audio channels (pin 3 and pin 4 input/outputs) are not only able to switch audio signal but also high-speed USB signal or low voltage UART signal as well.

The OCP93020 provides packages with Green or RoHS tiny 10L packages and operates over a temperature range of -40°C to 85°C.

Applications

Cell-phones/PDAMP3/MP4/PMPPortable instrumentationBattery powered communicationsComputer peripheral

Typical Application Circuit

OCP93020 Typical Application Circuit

features

  • Low RON audio/USB analog switch
  • Low USB CON: 7 p
  • Negative signal swing capable
  • Low RON: 5.5Ω
  • Low audio distortion
  • USB switch -3 dB bandwidth: 1100MHz
  • High crosstalk and off-isolation
  • Voltage supply operation: 2.7 to 5.5V
  • Packages: DQFN

Specifications

Type
Parameter
Type
Parameter
  • Part No.
    OCP93020
  • Vin
    2.7V~5.5V
  • USB BW
    950MHz
  • Audio THD+N
    ﹣108dB
  • Audio Ron
    1Ω
  • 3/4 pole detection
    NO
  • Package
    FCQFN-10

Package & Ordering

Package & Pin Definition

OCP93020 pin configuration
Pin NameDirectionPin Function
D1+I/ODifferential USB Data Input 1
D1-I/ODifferential USB Data Input 1
R/D2+I/OAudio R/L or differential USB data input 2
L/D2-I/OAudio R/L or differential USB data input 2
VBUSISwitch Selection
COM+I/OData/audio common port
COM-I/OData/audio common port
SELIControl input
VccPPower
GNDPPower Supply